in on-the-job training and related instruction.
HVAC-R Apprentice (0637V3) Time-Based
Quality Air Conditioning & Heating Inc.
Work Process Content
On the Job Training
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Test electrical circuits or components for proper functioning.
0
160
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
120
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
20
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
40
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
120
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
160
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
160
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
120
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
20
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
40
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
120
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
160
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
160
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
120
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
40
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
120
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
160
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
160
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
120
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
120
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
160
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
160
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
120
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
120
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
160
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
160
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
120
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
120
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
160
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
160
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
160
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
120
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
160
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Test electrical circuits or components for proper functioning.
0
160
Test electrical circuits or components for continuity, using electrical test equipment.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
160
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
160
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
160
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Supervise employees.
0
160
Supervise and instruct assistants.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
160
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
160
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
160
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
160
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
160
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
100
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
120
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
20
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
40
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
120
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
160
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
160
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
120
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
80
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
120
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
160
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
120
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
160
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
220
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
120
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
160
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
220
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
220
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
120
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
160
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
220
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
220
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
220
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
140
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
160
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
220
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
220
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
220
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
240
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
160
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
160
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
220
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Supervise employees.
0
160
Supervise and instruct assistants.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
220
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
220
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
240
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
260
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
200
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
160
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
220
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
220
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
220
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
240
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
260
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
240
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
160
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
160
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
220
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
220
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
220
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
240
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
260
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
240
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.
Maintain repair or maintenance records.
0
120
Keep records of repairs and replacements made and causes of malfunctions.
Drill holes in parts, equipment, or materials.
0
120
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Install home appliances.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Order materials, supplies, or equipment.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Travel to work sites to perform installation, repair or maintenance work.
0
120
Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
Schedule repair, installation or maintenance activities.
0
120
Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
Supervise employees.
0
160
Supervise and instruct assistants.
Train others in operational procedures.
0
10
Supervise and instruct assistants.
Lay out work according to specifications.
0
120
Lay out reference points for installation of structural and functional components, using measuring instruments.
Operate cranes, hoists, or other moving or lifting equipment.
0
140
Lift and align components into position, using hoist or block and tackle.
Test mechanical systems to ensure proper functioning.
0
120
Test pipes, lines, components, and connections for leaks.
Test electrical circuits or components for proper functioning.
0
200
Test electrical circuits or components for continuity, using electrical test equipment.
Determine operational compliance with regulations or standards.
0
160
Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area.
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
0
140
Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
Confer with customers or users to assess problems.
0
160
Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions.
Install heating, ventilation, or air conditioning (HVAC) equipment.
0
260
Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit.; Install, connect, or adjust thermostats, humidistats, or timers.; Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers.; Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Adjust equipment to ensure optimal performance.
0
220
Install, connect, or adjust thermostats, humidistats, or timers.; Adjust system controls to settings recommended by manufacturer to balance system.
Service heating, ventilation or air-conditioning (HVAC) systems or components.
0
220
Repair or replace defective equipment, components, or wiring.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Repair worn, damaged, or defective mechanical parts.
0
220
Repair or replace defective equipment, components, or wiring.; Perform mechanical overhauls and refrigerant reclaiming.; Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants.
Advise others on issues related to repairs, installation, or equipment design.
0
100
Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
Inspect systems to determine if they are operating properly.
0
240
Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
Replace worn, damaged, or defective mechanical parts.
0
Repair or replace defective equipment, components, or wiring.
Install energy-efficient heating, ventilation, or air conditioning (HVAC) equipment.
0
100
Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms.; Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.; Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions.
Braze metal parts or components.
0
260
Braze or solder parts to repair defective joints and leaks.
Connect electrical components or equipment.
0
240
Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.
Install machine or equipment replacement parts.
0
200
Install expansion and control valves, using acetylene torches and wrenches.
Cut materials according to specifications or needs.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Measure distances or dimensions.
0
140
Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.
Document operational activities.
0
120
Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders.