Applicable to All Areas

1. Health and Safety
2. Driving Safety
3. Environmental Protection
4. Surveying Principals
5. Plan Reading, Quantity Take Off
6. Communication Skills
7. Customer Relations
8. Hand Tool Operation and Maintenance
9. Emergency/Disaster Clean Up

1. Application
2. Rolling
3. Tamping

1. Forming
2. Base Compaction
3. Mixing
4. Placing/Pouring
5. Finishing

1. Light Duty Equipment Operation. Operates gasoline, diesel, and electric powered equipment such as walk­behind rollers, jack hammer/air compressor, trenchers, pumps, oxy­acetylene torch, vibratory compactors, chain saw, chipper/stump grinder, concrete/asphalt saws, circular saw, generator, lawn mowers, portable cement mixer, hand tools, and other similar equipment.
2. General Duty Equipment Operation. Operates equipment such as dump trucks, flatbed trucks, skid steer loaders, forklift, water truck, tack truck, small roadway materials reclaimer, paving equipment, tractor operation (pull behind mowers, box blade, slope mower), pavement rollers, bucket truck, and other related equipment.
3. Introduction to Heavy Equipment. Recognize and understand operation
4. Of heavy equipment such as motor­grader; Gradeall; bucket loaders, bulldozers, backhoes, and other similar heavy equipment.

1. Site Cleaning
2. Landscaping
3. Mowing
4. Maintenance
5. Herbicide/Pesticide Application
6. Prepares site for landscaping. Plants and mulches landscape vegetation. Waters, fertilizes, applies herbicides/pesticides, and trims plants and trees. Trims and removes tree branches obstructing pedestrian or vehicular traffic or signage. Removes dead, unsafe, or condemned trees from Right­of­Way. Operates edgers, clippers, trimmers, mowers, sod cutters, and various hand tools.

1. Work Zone Safety a. Types of Signs b. Types of Markings c. Work Area Housekeeping 2. CPR 3. First Aid 4. Drivers Safety 5. OSHA Regulations a. First Responder Awareness b. Work Site Environmental Protection c. Personal Protective Equipment (PPE) d. Personal Safety e. Hearing Protection f. Confined Space 6. Utility Locating 7. Emergency Operational Procedures a. Environmental and Weather Disasters

1. Rollers – walk behind 2. Jack Hammer/Air Compressor 3. Trenchers 4. Pumps 5. Oxy­Acetylene Torches 6. Vibratory Compactors 7. Skid Steer Loader 8. Saws a. Chain Saw b. Concrete/asphalt Saw c. Circular 9. Generators 10. Lawn Mowers 11. Cement mixer ­ portable 12. Hand Tools a. Cleaning, sharpening b. Proper Use and Care

1. Dump truck 2. Flat bed truck 3. Skid steer loader 4. Forklift a. OSHA Certificate 5. Water truck 6. Tack truck 7. Small roadway materials reclaimer 8. Roadway paving equipment 9. Tractor operations a. pull behind mowers b. box blade c. slope mower 10. Pavement rollers a. steel b. rubber 11. Bucket truck INTRODUCTION TO HEAVY EQUIPMENT SAFETY PRACTICES 1. Hand Signals 2. Motor graders 3. Gradeall 4. Bucket loader 5. Bulldozer 6. Backhoe 7. Road Grader

1. Nails (Types) 2. Power Actuated Fastening Tool (Certificate) 3. Saws (Types) 4. Lumber (Types/Sizes)

1. Concrete a. Use of Tools b. Mixing c. Forming d. Placing/Pouring e. Finishing 2. Asphalt a. Use of Tools b. Application / Types of Asphalt c. Math d. Preparation 1. Cutting Edges 2. Compaction 3. Tacking e. Rolling / Tamping Procedure

a. Use of Two­Way Radio b. Oral Communication Skills c. Communicating with the Public d. Written Communication Skills

1. Setting up a Safe Traffic Work Zone 2. Competent Person Training

1. Construction Plan Reading 2. Cut Sheets 3. Map Reading 4. Use of Survey Equipment Instruments

1. Math (Quantities) 2. Americans with Disabilities Act ­ Curb, Sidewalk, and Handrail Requirements 3. Forming 4. Reinforcing a. Wire b. Steel c. Fibre Mesh 5. Specifications a. Slumps b. Pumping c. Pounds per Square Inch d. Additives 6. Grinding 7. Sealing 8. Repair 9. Utility Cuts 10. Distress Identification a. Types b. Causes

1. Math (Quantities) 2. Grinding 3. Sealing 4. Repair 5. Utility Cuts 6. Distress Identification a. Types b. Causes

1. Trees a. Identification b. Trimming c. Removal 2. Brush a. Trimming b. Removal 3. Ground Cover – Restoration a. Compaction b. Leveling c. Sodding d. Seeding 4. Herbicide/Pesticide Application