1. Follow employer safety requirements, including the consistent and proper use of protective clothing and personal safety devices
2. Maintain a clean and orderly workplace, storing chemicals and corrosive or combustible materials properly and disposing of waste products according to company policies and local/federal laws and regulations
3. Use, store and maintain hand-tools properly to eliminate trip hazards, injury, electrocution or damage
4. Lift supplies and materials using proper body mechanics and assistive devices, such as hoists, lifts, forklifts and straps
5. Report and respond promptly, safely and appropriately to emergency or hazard situation and troubleshoot any issues that may arise
6. Use lock-out/tag-out procedures when working with appropriate tools and equipment

1. Outline operational sequence and steps in production process; identify points of transition between different employees or machines in the production area and impact on downstream production
2. Identify and obtain the appropriate raw materials for use in production
3. Obtain the necessary tools for performing the production run (such as tools to set up or modify equipment or to prepare or finish production materials)
4. Set up or program machine according to manufacturer’s and/or employer’s specifications, seeking support of a qualified programmer or maintenance technician when utilizing appropriate notification procedures
5. Set up production run based on recommended run time, production intervals, inspection intervals or production requirements
6. Coordinate production run with others based on supply requirements, product transition and inspection needs, or employer priorities
7. Notify appropriate individual of concerns regarding production plans, access to raw materials, run time or potential delays in production timing or production quantity/quality

1. Set up production equipment to meet production specifications
2. Inspect production equipment and surrounding work area
3. Adjust production equipment to meet and maintain production specifications
4. Notify appropriate individual of potential problems with equipment or machine function, need for routine maintenance, or concerns about unusual sounds, vibrations, smells or production errors

1. Maintain a neat and orderly work-space ensuring that work area is properly marked or cordoned off and eliminating or flagging potential trip hazards created by production materials or products
2. Plan an appropriate production schedule taking into account availability of raw materials and production capacity of equipment/machines
3. Utilize raw materials properly, using protective gear and lifting devices as necessary
4. Use personal protection devices as necessary and maintain proper ergonomic positioning relative to equipment or machines, raw materials and production products
5. Document run specifications, adjustments, output and quality assurance checks
6. Apply emergency stop procedures when necessary to avoid personal injury, damage to machinery or facilities, or spoilage of production run
7. If emergency stop procedures are employed, begin troubleshooting procedures to fix the equipment, including documenting issues with equipment and the production run

1. Observe production rate as compared to scheduled or projected rate, quantity or volume, and modify as necessary; notify appropriate individual of potential delays, under-production or potential additional capacity
2. Monitor production quality, including the inspection of parts and products, and troubleshoot if necessary to improve quality and accuracy
3. Perform product finishing according to production protocols
4. Document appropriate information, such as product quality parameters, lot numbers or other relevant information
5. Clearly and openly communicate concerns about quality or quantity of production with appropriate individual and colleagues in the production chain
6. Adjust to changes in production requirements of schedule

1. Shut down equipment according to manufacturer’s instructions or employer’s protocols
2. Engage emergency shut-down procedures when necessary
3. Disassemble equipment and components
4. Clean up tooling, equipment and work spaces
5. Sanitize equipment according to applicable standards
6. Note and troubleshoot needed maintenance or repair services and inform appropriate individual or department, if necessary
7. Follow preventive maintenance schedule and document

1. Determine the impact of production time, material supply, quality and quantity on the business goals of the employer, its supply chain and its customers
2. Understand the proprietary nature of materials and how it relates to the business goals and functions
3. Makes constructive suggestions regarding ways to improve the production process, workplace efficiencies or cost control
4. Participates in cross training activities to expand knowledge and skill set
5. Helps others learn about the business, the specifics of production and the connection between production and business goals
6. Participates in the calculation of costs and revenue, as related to production and business goals

Introduction to CNC Machines, G Code Programming, CAD and CAM

Introduction to Fastener Threads

Basic Measurement, Calibration Fundamentals, and Intro to GD&T

Lean Manufacturing & 5S Overview, and Intro to Six Sigma

Manual Mill and Engine Lathe Basics, Setup and Operations

Introduction to Mechanical Properties and Metals

Intro to EDM, Metal Cutting Safety, Processes, Theory, Operations, Geometry and Tool Usage

ISO 9001 Review, Quality and Customer Service

Automated Systems and Control and Robot Axes3

Intro to OSHA and Workplace Safety

Math Fundamentals, Mesurements, Geometry, and Trigonometry

Essentials of Leadership and Communication

Clamping Basics and Principles