1. Reading shop drawings 2. Symbols and abbreviations 3. Familiarization with NFPA 13, NFPA 14, NFPA 20, and NFPA 24

1. Identifying materials, grades and types of pipe, fittings, valves, hose and equipment, and fire sprinklers 2. Use and operation of trade tools 3. Maintaining and servicing of tools and equipment 4. Safety meetings

1. Selection of pipe, fittings, hangers, and devices for rough and finish work 2. Loading of required materials and equipment 3. Unloading of materials and equipment at job site using safety 4. Set up and use of rigging, scaffolding and mechanical lifts, and platforms 5. Safety meetings

1. Use of hand cutters 2. Use of dies and reamer 3. Setup and operation of power threading machine 4. Operation of power drills 5. Operation of torch 6. Safety meetings

1. Installation of cast iron pipe and fittings 2. Installation of plastic pipe and fittings 3. Installation of valves, post indicators, and hydrants 4. Rodding and thrust block installation 5. Valve pit installation 6. Flushing and testing of underground piping 7. Safety meetings

1. Distribution of system 2. Installation of feed mains and cross mains a. Grooved piping b. Threaded piping c. Welded piping 3. Branch line installation a. Exposed systems b. Concealed systems 4. Installation of hangers and system supports 5. Installation of valves including their trim 6. Installation of fire department connections 7. Setup and testing of system 8. Safety meetings

1. Distribution of system 2. Installation of feed mains and cross mains a. Grooved piping b. Threaded piping c. Welded piping 3. Branch line installation a. Exposed systems b. Concealed systems 4. Installation of hangers and system supports 5. Installation of valves including their trim 6. Installation of fire department connections 7. Setup and testing of system 8. Safety meetings

1. Distribution of system 2. Pipe installation 3. Installation of hose, hose valve assemblies, nozzles, and accessories 4. System testing 5. Safety meetings

1. Installation of deluge systems 2. Installation of preaction systems 3. Installation of clean agent systems 4. Installation of carbon dioxide systems 5. Installation of fire extinguishers 6. Installation of nitrogen generators 7. Safety meetings

1. Setting of fire pumps and jockey pumps 2. Alignment of fire pump and driver 3. Installing trim for fire pump and jockey pump 4. Installing fire pump controllers 5. Start up and testing of fire pumps and equipment 6. Safety meetings

1. Fabrication and installation of pipe on the job site 2. Care in cutting and patching of walls and ceilings 3. Repair and replacement of system components 4. Restoring system(s) to service 5. Notifying owner, fire department, and insurance company of impairment to system 6. Safety meetings