Apprentices progress at their own pace – they demonstrate
competency in skills and knowledge through assessment tests,
but are not required to complete a specific number of hours.
competency in skills and knowledge through assessment tests,
but are not required to complete a specific number of hours.
Machine Setter - Woodwork (0321CBV1) Competency-Based
Goodrich Corporation, DBA Goodrich Cabin Systems-Booth Veneers
Indiana (OA)
Documents
View Original Document
Individual state requirements may vary. Please contact your local apprenticeship office to ensure this version is suitable to your state’s requirements.
Work Process Content
On the Job Training
Anonymous
918
Skills
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Communicates effectively and professionally with colleagues, both internally and
externally
8
Communicates effectively and professionally with colleagues, both internally and
externally
8
- A. Reliably follows others? instructions
- B. Willingly asks questions about things not fully understood
- C. Works with due regard for others safety
- D. Demonstrates a working knowledge of the company policy manual
- E. Establishes a system of maintaining appropriate notes and reminders and completes any required logs, calibration records, etc.
- F. Ensures proper communications between previous and next shifts, with operations and supervision
- G. Identifies problems and changes that could lead to problems through the exchange of information with operators, supervisors, and others
- H. Establishes trust and rapport with operators, supervisors, and others
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
50
Remove accessories, tools, or other parts from equipment.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
50
Replace worn equipment components.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
50
Mark products, workpieces, or equipment with identifying information.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
50
Stack finished items for further processing or shipment.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
50
Inspect production equipment.
1
50
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
50
Clean production equipment.
1
50
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
50
Clean work areas.
1
50
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
50
Maintain production or processing equipment.
1
50
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
50
Set equipment guides, stops, spacers, or other fixtures.
1
50
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
2
Trim excess material from workpieces.
1
2
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
50
Remove accessories, tools, or other parts from equipment.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
50
Replace worn equipment components.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
50
Mark products, workpieces, or equipment with identifying information.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
50
Stack finished items for further processing or shipment.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
50
Inspect production equipment.
1
50
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
50
Clean production equipment.
1
50
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
50
Clean work areas.
1
50
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
50
Maintain production or processing equipment.
1
50
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
50
Set equipment guides, stops, spacers, or other fixtures.
1
50
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
50
Remove accessories, tools, or other parts from equipment.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
50
Replace worn equipment components.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
50
Mark products, workpieces, or equipment with identifying information.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
50
Stack finished items for further processing or shipment.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
50
Inspect production equipment.
1
50
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
50
Clean production equipment.
1
50
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
50
Clean work areas.
1
50
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
50
Maintain production or processing equipment.
1
50
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
50
Remove accessories, tools, or other parts from equipment.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
50
Replace worn equipment components.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
50
Mark products, workpieces, or equipment with identifying information.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
50
Stack finished items for further processing or shipment.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
50
Inspect production equipment.
1
50
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
50
Clean production equipment.
1
50
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
50
Clean work areas.
1
50
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
50
Remove accessories, tools, or other parts from equipment.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
50
Replace worn equipment components.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
50
Mark products, workpieces, or equipment with identifying information.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
50
Stack finished items for further processing or shipment.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
50
Inspect production equipment.
1
50
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
50
Clean production equipment.
1
50
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
50
Remove accessories, tools, or other parts from equipment.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
50
Replace worn equipment components.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
50
Mark products, workpieces, or equipment with identifying information.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
50
Stack finished items for further processing or shipment.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
50
Inspect production equipment.
1
50
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
50
Remove accessories, tools, or other parts from equipment.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
50
Replace worn equipment components.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
50
Mark products, workpieces, or equipment with identifying information.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
50
Stack finished items for further processing or shipment.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
50
Remove accessories, tools, or other parts from equipment.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
50
Replace worn equipment components.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
50
Mark products, workpieces, or equipment with identifying information.
1
50
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
50
Remove accessories, tools, or other parts from equipment.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
50
Replace worn equipment components.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
50
Remove accessories, tools, or other parts from equipment.
1
50
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
50
Load materials into production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
50
Mount materials or workpieces onto production equipment.
1
50
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
500
Operate woodworking equipment.
4
500
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
Conduct test runs of production equipment.
1
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
Monitor equipment operation to ensure that products are not flawed.
1
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
Set equipment controls to meet cutting specifications.
3
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
Inspect lumber or raw woodstock.
1
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
Mount attachments or tools onto production equipment.
2
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
Determine production equipment settings.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
Feed materials or products into or through equipment.
1
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
50
Select production equipment according to product specifications.
1
50
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
50
Maneuver workpieces in equipment during production.
1
50
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
50
Select production input materials.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
50
Feed materials or products into or through equipment.
1
50
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
50
Determine production equipment settings.
1
50
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
Feed materials or products into or through equipment.
1
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
50
Mount attachments or tools onto production equipment.
2
50
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
Determine production equipment settings.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
Feed materials or products into or through equipment.
1
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
50
Inspect lumber or raw woodstock.
1
50
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
Mount attachments or tools onto production equipment.
2
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
Determine production equipment settings.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
Feed materials or products into or through equipment.
1
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
50
Set equipment controls to meet cutting specifications.
3
50
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
Inspect lumber or raw woodstock.
1
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
Mount attachments or tools onto production equipment.
2
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
Determine production equipment settings.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
Feed materials or products into or through equipment.
1
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
50
Conduct test runs of production equipment.
1
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
Set equipment controls to meet cutting specifications.
3
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
Inspect lumber or raw woodstock.
1
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
Mount attachments or tools onto production equipment.
2
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
Determine production equipment settings.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
Feed materials or products into or through equipment.
1
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
50
Operate woodworking equipment.
4
50
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
500
Conduct test runs of production equipment.
1
500
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
Set equipment controls to meet cutting specifications.
3
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
Inspect lumber or raw woodstock.
1
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
Mount attachments or tools onto production equipment.
2
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
Determine production equipment settings.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
Feed materials or products into or through equipment.
1
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
500
Operate woodworking equipment.
4
500
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
500
Conduct test runs of production equipment.
1
500
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
50
Monitor equipment operation to ensure that products are not flawed.
1
50
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
Set equipment controls to meet cutting specifications.
3
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
Inspect lumber or raw woodstock.
1
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
Mount attachments or tools onto production equipment.
2
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
Determine production equipment settings.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
Feed materials or products into or through equipment.
1
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Operate woodworking equipment.
4
500
Operate woodworking equipment.
4
500
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Conduct test runs of production equipment.
1
500
Conduct test runs of production equipment.
1
500
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
Monitor equipment operation to ensure that products are not flawed.
1
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
Set equipment controls to meet cutting specifications.
3
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
Inspect lumber or raw woodstock.
1
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
Mount attachments or tools onto production equipment.
2
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
Determine production equipment settings.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
Feed materials or products into or through equipment.
1
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Operate woodworking equipment.
4
500
Operate woodworking equipment.
4
500
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.
- Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
Measure dimensions of completed products or workpieces to verify conformance to specifications.
1
50
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
Conduct test runs of production equipment.
1
Conduct test runs of production equipment.
1
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
Monitor equipment operation to ensure that products are not flawed.
1
Monitor equipment operation to ensure that products are not flawed.
1
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
Set equipment controls to meet cutting specifications.
3
Set equipment controls to meet cutting specifications.
3
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.
Inspect lumber or raw woodstock.
1
Inspect lumber or raw woodstock.
1
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
Mount attachments or tools onto production equipment.
2
Mount attachments or tools onto production equipment.
2
- Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Determine production equipment settings.
1
Determine production equipment settings.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Feed materials or products into or through equipment.
1
Feed materials or products into or through equipment.
1
- Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.
Select production input materials.
1
Select production input materials.
1
- Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.
Maneuver workpieces in equipment during production.
1
Maneuver workpieces in equipment during production.
1
- Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.
Select production equipment according to product specifications.
1
Select production equipment according to product specifications.
1
- Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.
Load materials into production equipment.
1
Load materials into production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Mount materials or workpieces onto production equipment.
1
Mount materials or workpieces onto production equipment.
1
- Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.
Remove accessories, tools, or other parts from equipment.
1
Remove accessories, tools, or other parts from equipment.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Replace worn equipment components.
1
Replace worn equipment components.
1
- Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.
Mark products, workpieces, or equipment with identifying information.
1
Mark products, workpieces, or equipment with identifying information.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Stack finished items for further processing or shipment.
1
Stack finished items for further processing or shipment.
1
- Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.
Inspect production equipment.
1
Inspect production equipment.
1
- Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.
Clean production equipment.
1
Clean production equipment.
1
- Clean or maintain products, machines, or work areas.
Clean work areas.
1
Clean work areas.
1
- Clean or maintain products, machines, or work areas.
Maintain production or processing equipment.
1
Maintain production or processing equipment.
1
- Clean or maintain products, machines, or work areas.
Set equipment guides, stops, spacers, or other fixtures.
1
Set equipment guides, stops, spacers, or other fixtures.
1
- Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.
Trim excess material from workpieces.
1
Trim excess material from workpieces.
1
- Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.
Remove products or workpieces from production equipment.
1
Remove products or workpieces from production equipment.
1
- Unclamp workpieces and remove them from machines.
Program equipment to perform production tasks.
1
Program equipment to perform production tasks.
1
- Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.
Lubricate production equipment.
1
Lubricate production equipment.
1
- Grease or oil woodworking machines.
Operate cranes, hoists, or other moving or lifting equipment.
1
Operate cranes, hoists, or other moving or lifting equipment.
1
- Control hoists to remove parts or products from work stations.
Sharpen cutting or grinding tools.
1
Sharpen cutting or grinding tools.
1
- Sharpen knives, bits, or other cutting or shaping tools.
Related Instruction Content
Training Provider(s):