Apprentices progress at their own pace – they demonstrate
competency in skills and knowledge through assessment tests,
but are not required to complete a specific number of hours.
competency in skills and knowledge through assessment tests,
but are not required to complete a specific number of hours.
Industrial Maintenance Mechanic
Anonymous
![organization logo](https://flowbite.com/docs/images/examples/image-1@2x.jpg)
Alabama (SAA)
Documents
View Redacted Document
Personal and employer info redacted
Individual state requirements may vary. Please contact your local apprenticeship office to ensure this version is suitable to your state’s requirements.
Work Process Content
On the Job Training
![organization logo](https://flowbite.com/docs/images/examples/image-1@2x.jpg)
Anonymous
72
Skills
Maintain a safe vehicle with legal and regulatory requirements
3
Maintain a safe vehicle with legal and regulatory requirements
3
- Adheres to safety, health, and environmental rules and regulations
- Performs machine operation, including start-up, emergency, and normal shutdown and manual functions to effectively and safely meet production and maintenance requirements (with operator present)
- Monitors machine operation and verifies that performance meets production requirements
Properly and safely prepare vehicle, including loading
6
Properly and safely prepare vehicle, including loading
6
- Locates, interprets, and stores machine operation and maintenance documentation
- Performs planned and unscheduled machine maintenance procedures in accordance with a company-approved maintenance plan
- Adheres to mechanical power transmission safety rules
- Uses dimensional measurement tools properly to inspect dimensions of shafts and other components
- Safely examines, troubleshoots and repairs power transmission
- Aligns and adjusts gear drives
Safely travel and transport goods (if loaded) to correct location, meeting or exceeding deadlines
8
Safely travel and transport goods (if loaded) to correct location, meeting or exceeding deadlines
8
- Installs, aligns and adjusts a pillow block bearing
- Lubricates equipment using correct lubricants and as recommended by manufacturer's guidance
- Performs a preventive maintenance procedure for a given machine to extend machine life and minimize downtime
- Performs predictive maintenance on a given machine to extend machine life and minimize downtime
- Reads and interprets technical drawings of parts and assemblies with tolerances and basic Geometric Dimensioning and Tolerancing (GD&T)
- Uses hand tools to inspect, adjust/tighten and assemble/disassemble equipment and support preventive maintenance, inspection and troubleshooting activities
- Uses hoists and other tools to safely handle and move parts and equipment
- Selects and uses troubleshooting methodologies to find malfunctions in machine systems to return the system to reliable, productive use in the shortest time possible
Pick up and deliver cargo on time and in good condition
5
Pick up and deliver cargo on time and in good condition
5
- Adheres to fluid power systems safety rules while understanding safety, health, and environmental rules and regulations
- Interprets basic fluid power schematics and identifies schematic symbols, process flow and operation of the components and systems
- Starts up and shuts down a hydraulic system and adjusts system pressure using a fixed displacement pump
- Adjusts hydraulic actuator speed using a flow control valve
- Services a hydraulic filter to maximize hydraulic fluid cleanliness
Utilize appropriate vehicle communication devices; communicate with others regarding vehicle operation and maintenance, safe driving protocols, and cargo transportation and delivery
8
Utilize appropriate vehicle communication devices; communicate with others regarding vehicle operation and maintenance, safe driving protocols, and cargo transportation and delivery
8
- Adds, changes and properly disposes of waste hydraulic fluid
- Installs hydraulic conductors
- Installs and tests components in a basic hydraulic circuit
- Troubleshoots a basic hydraulic circuit or rotary actuator circuit
- Adheres to fluid power systems safety rules
- Adjusts pneumatic system branch and actuator speed operating pressure using a regulator
- Services a pneumatic filter through inspection, drainage, and changes
- Services a pneumatic lubricator through inspection, fills, and adjustments
Maintain accurate and complete records related to travel times, distances, expenses, and delivery of products
4
Maintain accurate and complete records related to travel times, distances, expenses, and delivery of products
4
- Installs, fills, and adjusts pneumatic conductors
- Starts up and shuts down a reciprocating air compressor and adjusts operating pressure
- Installs and tests the operation of components in a basic pneumatic linear or rotary circuit given a schematic
- Installs and tests components in a pneumatic circuit that uses vacuum generators given a schematic
Drive truck during the day and at night, in a variety of weather situations and road conditions
9
Drive truck during the day and at night, in a variety of weather situations and road conditions
9
- Troubleshoots a basic pneumatic circuit
- Adheres to electrical power and control systems safety rules for electrical power and control systems
- Interprets electrical control and power schematics to ensure the operation of the components and system
- Adjusts limit switches and electronic sensors
- Measures voltage, current and resistance in an electrical circuit to verify system operation and power levels
- Selects, installs, and tests fuses and circuit breakers
- Installs and tests DC electric motors in a manual control circuit
- Installs and tests AC electric motors in a manual control circuit
- Installs and tests electrical relay control components and circuits
Operate according to health, safety, and environmental standards, best practices, and requirements
4
Operate according to health, safety, and environmental standards, best practices, and requirements
4
- Installs and tests electro-fluid power components and circuits
- Tests and repairs machine electrical ground
- Troubleshoots an electrical motor relay control circuit
- Troubleshoots a solenoid-operated fluid power relay control circuit
Operates in the workplace in a safe and effective manner
5
Operates in the workplace in a safe and effective manner
5
- Replaces electrical control wiring using terminal attachment
- Replaces electrical control wiring using solder attachment
- Installs, examines, repairs, and replaces
- Adheres to safety, health, and environmental rules and regulations for electronic power and control systems
- Connects and tests a DC power supply to ensure proper operation
Monitors, troubleshoots, installs, and repairs basic mechanical systems
12
Monitors, troubleshoots, installs, and repairs basic mechanical systems
12
- Installs and tests solid-state AC and DC discrete and analog relays
- Installs and tests analog electronic sensors and signal conditioning equipment
- Adjusts and repairs AC drive to control motor speed and torque
- Transfers programs to programmable controller using a PC
- Creates a basic Programmable Logic Controller (PLC) ladder-style program using internal and external contacts, timers, counters, non-retentive output coils, internal coils, subroutines, conditional commands and math commands
- Installs and tests basic PLC components that uses a ladder logic program to interface to a hardware component
- Performs basic troubleshooting of PLC and controlled components
- Adheres to safety, health, and environmental rules and regulations for welding
- Uses an acetylene torch properly while using appropriate safety equipment and precautions to cut steel parts
- Performs basic welding and achieves necessary strength, resilience, shape and size requirements
- Prepares parts to be welded including degreasing, cleaning, grinding and inspecting
- Uses Shielded Metal Arc Welding (SMAW) Welder to make basic welds on flat stock
Monitors, troubleshoots, installs, and repairs basic hydraulic systems
8
Monitors, troubleshoots, installs, and repairs basic hydraulic systems
8
- Uses Gas Metal Arc Welding (GMAW) Welder to make basic welds on flat stock
- Inspects welds for integrity and functionality
- Uses plasma cutter to cut flat stock
- Adheres to safety, health and environmental rules and regulations for piping systems
- Interprets basic piping schematics including specifications and fittings
- Identifies and selects correct piping materials
- Accurately measures, cuts and prepares piping for installation
- Installs and tests piping systems
Related Instruction Content
Training Provider(s):
![organization logo](https://flowbite.com/docs/images/examples/image-1@2x.jpg)
Reid State Technical College
1.9K
RI hours
English Composition I
45
English Composition I
45
Ethics in Society
45
Ethics in Society
45
Orientation
15
Orientation
15
Intermediate College Algebra
45
Intermediate College Algebra
45
Mathematical Application
45
Mathematical Application
45
Introduction to Computers OR CIS 157
45
Introduction to Computers OR CIS 157
45
General Psychology
45
General Psychology
45
DC Fundamentals OR INT 101
75
DC Fundamentals OR INT 101
75
Principles of Construction Wiring OR Industrial Wiring I
75
Principles of Construction Wiring OR Industrial Wiring I
75
Hydraulics/Pneumatics OR Fundamentals of Industrial Hydraulics/Pneumatics
60
Hydraulics/Pneumatics OR Fundamentals of Industrial Hydraulics/Pneumatics
60
Intro to Programmable Logic Controllers
60
Intro to Programmable Logic Controllers
60
NCCER Core
60
NCCER Core
60
AC Fundamentals OR INT 103
75
AC Fundamentals OR INT 103
75
Troubleshooting Techniques
60
Troubleshooting Techniques
60
Advanced Programmable Logic Controllers
60
Advanced Programmable Logic Controllers
60
Motor Controls I
75
Motor Controls I
75
Industrial Instrumentation
45
Industrial Instrumentation
45
Industrial Instrumentation Lab
60
Industrial Instrumentation Lab
60
Preventative Maintenance OR MSSC WKO 144 Maintenance Awareness OR ILT 173
75
Preventative Maintenance OR MSSC WKO 144 Maintenance Awareness OR ILT 173
75
Industrial Robotics
45
Industrial Robotics
45
Industrial Robotics Lab
60
Industrial Robotics Lab
60
Motor Controls II
75
Motor Controls II
75
Industrial Blueprint Reading OR MSSC WKO 143 Production OR ILT 172
75
Industrial Blueprint Reading OR MSSC WKO 143 Production OR ILT 172
75
Principles of Industrial Mechanics
75
Principles of Industrial Mechanics
75
Industrial Maintenance Safety OR MSSC WKO 141 Safety OR ILT 170
45
Industrial Maintenance Safety OR MSSC WKO 141 Safety OR ILT 170
45
Principles of Mechanical and Drawing OR MSSC WKO 142 Quality Practices OR ILT 171
75
Principles of Mechanical and Drawing OR MSSC WKO 142 Quality Practices OR ILT 171
75
Industrial Safety and Maintenance Techniques
75
Industrial Safety and Maintenance Techniques
75
Components of Material Handling
60
Components of Material Handling
60
Principles of Industrial Pumps and Piping
60
Principles of Industrial Pumps and Piping
60
Digital Fundamentals
75
Digital Fundamentals
75
Solid State
75
Solid State
75
National Electric Code
45
National Electric Code
45