Apprentices complete a required number of hours
in on-the-job training and related instruction.
in on-the-job training and related instruction.
Stationary Engineer
USDOL
![organization logo](https://flowbite.com/docs/images/examples/image-1@2x.jpg)
National (OA)
Documents
View Original Document
Individual state requirements may vary. Please contact your local apprenticeship office to ensure this version is suitable to your state’s requirements.
Work Process Content
On the Job Training
![organization logo](https://flowbite.com/docs/images/examples/image-1@2x.jpg)
Anonymous
8K
OJT hours
Electrical Control and Distribution
4
800
Electrical Control and Distribution
4
800
- Adjust controls and/or valves on equipment to provide power, and to regulate set operations for all MEP, HVAC, and industrial processes systems.
- Test electrical systems to determine power, using amperage, voltage, resistance, and power recording meters.
- Read, review, modify as needed and follow project related documents such as blueprints, drawings. Locate and determine electrical malfunctions using test equipment. Repair malfunctions by such methods as replacing burned out elements, fuses, and replacing defective wiring, cleaning, and repairing equipment. Tests electrical equipment, such as HVAC equipment, motors, heaters, and controls for safety and efficiency, using standard test equipment and by observing functions. Install fixtures, motors, and other electrical equipment. Knowledge of security and fire alarm systems. Build & wire BAS control. Installation and termination VFDs, low and line voltage lighting controls, control panel power, and other components of the Building Automation Control Systems. Troubleshoot and repair low and line voltage circuits.
- Perform repair and maintain Sustainable Energy systems, including, but not limited to, solar, EV charging stations, and wind turbines.
Refrigeration Systems
6
1.3K
Refrigeration Systems
6
1.3K
- Develop operation, safety, and maintenance procedures or assist in their development for commercial and industrial refrigeration systems.
- Per EPA guidelines, develop and maintain refrigerant usage database.
- Check refrigerant levels and inspect for leaks. Clean and straighten condenser coils to ensure proper air flow. Check gas connections for leaks. Tighten all electrical connections.
- Clean all water-cooled condenser tubes as required.
- Perform or arrange for repairs, such as complete overhauls, replacement of defective parts or fabrication of new parts.
- Effective use of automated technology to assist in maintaining environmental controls; energy savings strategies and the well health of building indoor and outdoor air quality, which Includes, but is not limited to, Building Automation Systems (BAS); Third Party Internet of Things (IOT) Automated Controls; programming of BAS software and protocols; BAS monitoring platforms which assist in the convergence of Operating Technologies (OT) and Information Technologies (IT) analytics; drone technology for outdoor air quality, building façade inspections, cooling towers and roofs, environmental outdoor air quality monitoring, and other industry-based functions; and North American Technician Excellence (NATE) Certification.
Air Conditioning Systems
4
1.3K
Air Conditioning Systems
4
1.3K
- Perform repair and maintain HVAC systems but not limited to, air-handlers, variable air volume boxes, heat pumps, chillers, boilers, and all ancillary devices such pumps, variable frequency drives, cooling towers and various heat exchangers.
- Perform repair and maintain Sustainable Energy systems, including, but not limited to, solar, and wind turbine.
- Obtain required State and City required licensing, CFC Training & certification, North American Technician Excellence (NATE) certificate and any other municipality-required licensing or certification.
- Effective use of automated technology to assist in maintaining environmental controls; energy savings strategies and the well health of building indoor and outdoor air quality, which Includes, but is not limited to, Building Automation Systems (BAS); Third Party Internet of Things (IOT) Automated Controls; programming of BAS software and protocols; BAS monitoring platforms which assist in the convergence of Operating Technologies (OT) and Information Technologies (IT) analytics; drone technology for outdoor air quality, building façade inspections, cooling towers and roofs, environmental outdoor air quality monitoring, and other industry-based functions; and North American Technician Excellence (NATE) Certification.
Boilers
4
1.3K
Boilers
4
1.3K
- Operate or tend stationary engines, boilers, and auxiliary equipment, such as pumps, compressors, or air-conditioning equipment, to supply and maintain steam or heat for buildings, marine vessels, or pneumatic tools.
- Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
- Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
- Effective use of automated technology to assist in maintaining environmental controls; energy savings strategies and the well health of building indoor and outdoor air quality, which Includes, but is not limited to, Building Automation Systems (BAS); Third Party Internet of Things (IOT) Automated Controls; programming of BAS software and protocols; BAS monitoring platforms which assist in the convergence of Operating Technologies (OT) and Information Technologies (IT) analytics; drone technology for outdoor air quality, building façade inspections, cooling towers and roofs, environmental outdoor air quality monitoring, and other industry-based functions; and North American Technician Excellence (NATE) Certification.
Air Handling Systems
5
1.3K
Air Handling Systems
5
1.3K
- Installation and maintenance of fan coil units and air handling units including filter changes, periodic lubrication, bearing change out and drive belt replacement.
- Installation and maintenance of exhaust fans and associated controls, hot water, chilled water, and domestic water circulating pump; rebuild pumps as required.
- Perform airflow readings as to maintain original system design and manufacturers recommendations.
- Perform repair and maintain Sustainable Energy systems, including, but not limited to, solar, and wind turbines.
- Effective use of automated technology to assist in maintaining environmental controls; energy savings strategies and the well health of building indoor and outdoor air quality, which Includes, but is not limited to, Building Automation Systems (BAS); Third Party Internet of Things (IOT) Automated Controls; programming of BAS software and protocols; BAS monitoring platforms which assist in the convergence of Operating Technologies (OT) and Information Technologies (IT) analytics; drone technology for outdoor air quality, building façade inspections, cooling towers and roofs, environmental outdoor air quality monitoring, and other industry-based functions; and North American Technician Excellence (NATE) Certification.
Industrial Equipment
4
800
Industrial Equipment
4
800
- Operate mechanical hoppers and provide assistance in their adjustment and repair.
- Contact equipment manufacturers or appropriate specialists when necessary to resolve equipment problems.
- Perform repair and maintain Sustainable Energy systems, including, but not limited to, solar, EV charging stations, and wind turbines.
- Effective use of automated technology to assist in maintaining environmental controls; energy savings strategies and the well health of building indoor and outdoor air quality, which Includes, but is not limited to, Building Automation Systems (BAS); Third Party Internet of Things (IOT) Automated Controls; programming of BAS software and protocols; BAS monitoring platforms which assist in the convergence of Operating Technologies (OT) and Information Technologies (IT) analytics; drone technology for outdoor air quality, building façade inspections, cooling towers and roofs, environmental outdoor air quality monitoring, and other industry-based functions; and North American Technician Excellence (NATE) Certification.
Chemical Treatment of Water Systems
6
800
Chemical Treatment of Water Systems
6
800
- Achieve water quality requirements for use, reuse, or compliant discharge to the environment.
- Produce less waste during water treatment and provide systems for brine management and evaporation pond remediation.
- Selectively remove contaminants.
- Perform and log chemical tests on cooling towers, steam boilers, and all closed loop systems.
- Perform repair and maintain Sustainable Energy systems, including, but not limited to, solar.
- Effective use of automated technology to assist in maintaining environmental controls; energy savings strategies and the well health of building indoor and outdoor air quality, which Includes, but is not limited to, Building Automation Systems (BAS); Third Party Internet of Things (IOT) Automated Controls; programming of BAS software and protocols; BAS monitoring platforms which assist in the convergence of Operating Technologies (OT) and Information Technologies (IT) analytics; drone technology for outdoor air quality, building façade inspections, cooling towers and roofs, environmental outdoor air quality monitoring, and other industry-based functions; and North American Technician Excellence (NATE) Certification.
Fuels and Fuel Technologies
4
600
Fuels and Fuel Technologies
4
600
- Weigh, measure, and record fuel used.
- Give environmental considerations to the use of fuels and fuel types.
- Maintain and monitor all fuel conditioning equipment.
- Maintain and monitor all above ground and underground storage tanks.
Related Instruction Content
Training Provider(s):
![organization logo](https://flowbite.com/docs/images/examples/image-1@2x.jpg)
IUOE Joint Apprenticeship Committee (JAC)
630
RI hours
Basic Mathematics
16
Basic Mathematics
16
Safety and First Aid
10
Safety and First Aid
10
Labor Movement and Review
9
Labor Movement and Review
9
HAZMAT
40
HAZMAT
40
Algebra and Geometry
14
Algebra and Geometry
14
Introduction to Boilers
14
Introduction to Boilers
14
Boiler Accessories
14
Boiler Accessories
14
Boiler Design and Construction
14
Boiler Design and Construction
14
Operation and Maintenance of Steam Boilers
27
Operation and Maintenance of Steam Boilers
27
Combustion of Fuel
26
Combustion of Fuel
26
Fundamentals of Air Conditioning
21
Fundamentals of Air Conditioning
21
Air Conditioning Components
21
Air Conditioning Components
21
Refrigerants
10
Refrigerants
10
Air Conditioning Design and Construction
21
Air Conditioning Design and Construction
21
Refrigeration and Air Conditioning
75
Refrigeration and Air Conditioning
75
Electricity I
72
Electricity I
72
Electricity II
72
Electricity II
72
Direct Digital Controls and Building Automation Systems
40
Direct Digital Controls and Building Automation Systems
40
HVAC Testing and Modeling
36
HVAC Testing and Modeling
36
IAQ Training
42
IAQ Training
42
Course Review
38
Course Review
38