in on-the-job training and related instruction.
Roofer
Oregon Columbia Roofers JATC
Work Process Content
On the Job Training
General
0
540
1) Identification of materials 2) Types of roofs 3) Carrying and placing materials for use of journeyperson 4) Erection of hoists 5) Hoisting, loading, and unloading all materials and tools 6) Proper clothing and personal protective (safety) equipment 7) Safe work practices 8) Fall protection
Built-up roofing, waterproofing and damp-proofing, composition, tar asphalt, and general work
0
1.3K
1) Identification of equipment and materials 2) Regulating the heat of bitumen to roof surfaces; application of bitumen to roof surfaces 3) Preparing surfaces 4) Preparing, cutting, placing, fitting, and trimming strips of felt, other membranes, and insulation boards to surfaces 5) Applying additional layers of material as required 6) Flashing with bitumen or roof cement 7) Applying aggregates or ballast over composition and single-ply membranes 8) Installing liners for reservoirs and hazardous waste receptacles 9) Applying single-ply materials as waterproofing, damp- proofing, burn hazards
Steep roofing, slate, tile, shingles, and substitute materials
0
360
1) Types of materials, including photovoltaic shingles 2) Underlayments 3) Punching nail holes, cutting and trimming slate, types of roofs and identification of hips, ridges, valleys 4) Sealing ridges 5) Flashing 6) Replacing broken or missing slates or shingles 7) Dangers of removing asbestos shingle roofs
Single-ply material
0
900
1) Systems, including Polyvinyl chloride (PVC) 2) Ethylene propylene monomer (EPDM) systems 3) Chlorinated polyethylene (PE) systems 4) Chlorosulfonated polyethylene (CSPE or HYPALON) systems 5) Neoprene 6) Butyl rubbers 7) Polyisobutylene (PIB) systems 8) Ethylene interpolymers (EIP) systems 9) Modified systems 10) Fastening methods including termination and compression bars, anchors, and mechanically attached or fully adhered systems 11) Ballast, pavers, walkways 12) Caulking, sealant
Reroofing
0
360
1) Reroofing or recovering of existing buildings 2) Proper job set-up 3) Safe disposal of debris 4) Unique safety requirements
Other
0
180
1) Butyl rubber (sheet and liquid), neoprene 2) Hypalon 3) Epoxy coatings, acrylic coatings, resin emulsions, plastic coatings and urethane foam 4) Safe work practices 5) Felt, wood, lumber, insulating board pitch, flashing cement, gravel, slag, precast tile blocks, cement mortar, grout, dilute acid solution
Safety
0
360
Related Instruction Content
Training Provider(s):