1) Identification of materials 2) Types of roofs 3) Carrying and placing materials for use of journeyperson 4) Erection of hoists 5) Hoisting, loading, and unloading all materials and tools 6) Proper clothing and personal protective (safety) equipment 7) Safe work practices 8) Fall protection

1) Identification of equipment and materials 2) Regulating the heat of bitumen to roof surfaces; application of bitumen to roof surfaces 3) Preparing surfaces 4) Preparing, cutting, placing, fitting, and trimming strips of felt, other membranes, and insulation boards to surfaces 5) Applying additional layers of material as required 6) Flashing with bitumen or roof cement 7) Applying aggregates or ballast over composition and single-ply membranes 8) Installing liners for reservoirs and hazardous waste receptacles 9) Applying single-ply materials as waterproofing, damp- proofing, burn hazards

1) Types of materials, including photovoltaic shingles 2) Underlayments 3) Punching nail holes, cutting and trimming slate, types of roofs and identification of hips, ridges, valleys 4) Sealing ridges 5) Flashing 6) Replacing broken or missing slates or shingles 7) Dangers of removing asbestos shingle roofs

1) Systems, including Polyvinyl chloride (PVC) 2) Ethylene propylene monomer (EPDM) systems 3) Chlorinated polyethylene (PE) systems 4) Chlorosulfonated polyethylene (CSPE or HYPALON) systems 5) Neoprene 6) Butyl rubbers 7) Polyisobutylene (PIB) systems 8) Ethylene interpolymers (EIP) systems 9) Modified systems 10) Fastening methods including termination and compression bars, anchors, and mechanically attached or fully adhered systems 11) Ballast, pavers, walkways 12) Caulking, sealant

1) Reroofing or recovering of existing buildings 2) Proper job set-up 3) Safe disposal of debris 4) Unique safety requirements

1) Butyl rubber (sheet and liquid), neoprene 2) Hypalon 3) Epoxy coatings, acrylic coatings, resin emulsions, plastic coatings and urethane foam 4) Safe work practices 5) Felt, wood, lumber, insulating board pitch, flashing cement, gravel, slag, precast tile blocks, cement mortar, grout, dilute acid solution

1. Steep roofing 2. Single-ply roofing 3. Built-up roofing

1. Fall protection 2. Ladder safety 3. Control measures 4. MSDS 5. Fire hazards 6. Electrical safety 7. Trenches and confined space

1. Math for roofers a. Measurement and numbers b. Fractions and decimals c. Roofer’s math 2. Reading blueprints and specifications a. Organization of a set of plans b. Reading plans and elevations and using a scale c. Reading roof plans and details

1. Kettle & tankers a. Kettle safety b. Kettles & tankers c. Heating bitumen d. Delivering hot

2. Tools & equipment a. Hand tools b. Hand & power equipment c. Operating power equipment d. Hoists

3. Roof, decks, and vapor barriers a. Pitch, slope, & types of roofs b. Roof features c. Decks d. Vapor barriers

4. Insulation a. Introduction to insulation b. Installing insulation c. Tapered insulation d. Mechanical fasteners

5. Installing built-up roofing a. Roofing felts b. Planning and preparation c. Starting a BUR d. Laying and mopping the plies e. Surfacing, sealants, and coatings f. Flashings

6. Maintenance and repair a. Re-roofing b. Leaks and repairs

1. Introduction a. Single-ply roofing b. Installation

2. EPDM a. Introduction to EPDM b. EPDM ballasted system c. EPDM mechanically fastened systems d. EPDM adhered systems e. Detailing EPDM

3. Hot-air welding a. Hot-air welded systems b. Hot-air welding c. Detailing hot-air welded system

4. Modified bitumen systems a. Introduction to modified bitumens b. Safety c. Atactic Polypropylene (APP) d. Styrene butadiene styrene (SBS) e. Methods of installation f. Detailing modified bitumens g. Repair and maintenance h. Fire hazards

1. Working on steep slope roofs a. Safety b. Steep slope roofs c. Tools and equipment d. Hoisting e. Composition shingles and fire-resistant shingles

2. Installing a. Installation techniques b. Wood and shake shingles c. Slate d. Asphalt roll material e. Tile f. Photovoltaic shingles and systems

3. Maintenance and repair a. Tear-off and re-roofing b. Repairs